Switching graphic display/reversing cameraon and offSwitching graphic display/reversing cameraon and off  - Settings - Audi parking system - Controls - Audi A5 Owner's Manual - Audi A5

The settings for the graphic display and reversing camera can be selected on the sound system or MMI.

MMI display: Display APS - submenu
MMI display: Display APS - submenu

MMI display: proximity graphic
MMI display: proximity graphic

Select: Function selector button CAR > Audi parking system > Display

When parking, you can use the reversing camera (Rear View) and the graphic display separately or in combination.

If you manually switch over to the reversing camera by pressing the control button marked Rear View the control button in the bottom right-hand corner will show Graphic.

fig. 163. You can use the control buttons to switch between the Rear View camera and Graphic display at any time as desired. The settings selected on the sound system or MMI remain stored.

Setting Graphic:

If you have selected Graphic in the settings, the screen will automatically show the graphic display when the parking system is activated.

Setting Rear View

If you have selected Rear View the reversing camera image, will be displayed whenever you activate the parking system (both when reversing and when driving forwards).

Setting Automatic:

If you have selected Automatic the screen will automatically show the reversing camera image when you engage reverse gear and the graphic display when you drive forwards

Setting Off:

If you select off the reversing camera and graphic display are both deactivated. The acoustic parking aid will, however, remain activated.

If you change the settings on the sound system or MMI the changes will not take Note

If you change the settings on the sound system or MMI the changes will not take effect until the next time you switch on the parking system.