Dynamic steeringDynamic steering  - Auto-check control - Driver information system - Controls - Audi A4 Owner's Manual - Audi A4

This message and the  symbol Dynamic steering: system fault

This message and the will appear if a fault develops in the system while the vehicle is moving. You can symbol will appear if a fault develops in the system while the vehicle is moving. You can continue driving carefully at reduced speed to the next qualified workshop, however the steering may feel heavier and its response may be more sensitive than usual. In addition, it is possible that the steering wheel will be off centre when driving in a straight line.

Dynamic steering: initialising

If this message appears and the warning lamp this indicates that the dynamic steering is being initialised. The steering wheel flashes in the instrument cluster, this indicates that the dynamic steering is being initialised. The steering wheel will move slightly after the engine is started. The dynamic steering may be initialised if the steering wheel was moved while the vehicle was stopped. The warning lamp will go out when the initialisation has been completed.

WARNING

Have the system malfunction in the dynamic steering repaired by a qualified workshop as soon as possible – risk of accident.

Note

The stabilisation functions of the dynamic steering are not available in the event of a system malfunction.